Gear motor planetary reduction gearbox ratio 50:1 nema 17 L=40mm stepper motor cnc robot pump
- Продавецmysm.us
- Список ценUS $48.50piece
- Продажная ценаUS $48.50piece
- ДоставкаБесплатная доставка
- Рейтинги
Oписание продукта
NEMA 17 Planetary Gear Stepper Motor with Ratio 50:1 Gearbox 42mm Motor Length 63mm 1.5A Max 37Nm 4 Wire for CNC Router
Product Description
Step Angle Accuracy: ±5%(full step, no load)
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C
Insulation Resistance: 100MΩ Min.500V DC
Dielectric Strength: 500V AC for 1 minute
Electrical Specification:
| Model | step angle | Current | Resistance | Inductance | Holding Torque | Detent Torque | Rotary Inertia | Motor Length | Lead Wire | Weight |
| (°) | (A) | (Ω) | (mH) | (N.cm) | (N.cm) | (g.cm2) | (mm) | (NO.) | (g) | |
| 42HS2806A4 | 1.8 | 0.6 | 8 | 10 | 12 | 1.6 | 20 | 28 | 4 | 150 |
| 42HS3413A4 | 1.8 | 1.3 | 2.4 | 2.8 | 28 | 1.6 | 34 | 34 | 4 | 220 |
| 42HS3417A4 | 1.8 | 1.7 | 1.2 | 1.8 | 28 | 1.6 | 34 | 34 | 4 | 220 |
| 42HS3404A4 | 1.8 | 0.4 | 30 | 35 | 28 | 1.6 | 34 | 34 | 4 | 220 |
| 42HS3404A6 | 1.8 | 0.4 | 30 | 18 | 21 | 1.6 | 34 | 34 | 6 | 220 |
| 42HS3401A6 | 1.8 | 0.16 | 75 | 40 | 14 | 1.6 | 34 | 34 | 6 | 220 |
| 42HS4017A4 | 1.8 | 1.7 | 1.5 | 2.8 | 40 | 2.2 | 54 | 40 | 4 | 280 |
| 42HS4013A4 | 1.8 | 1.3 | 2.5 | 5 | 40 | 2.2 | 54 | 40 | 4 | 280 |
| 42HS4012A6 | 1.8 | 1.2 | 3.2 | 2.8 | 28 | 2.2 | 54 | 40 | 6 | 280 |
| 42HS4004A6 | 1.8 | 0.4 | 30 | 28 | 28 | 2.2 | 54 | 40 | 6 | 280 |
| 42HS4817A4 | 1.8 | 1.7 | 1.8 | 3.2 | 52 | 2.6 | 68 | 48 | 4 | 350 |
| 42HS4813A4 | 1.8 | 1.3 | 3.2 | 5.5 | 52 | 2.6 | 68 | 48 | 4 | 350 |
| 42HS4823A4 | 1.8 | 2.3 | 1.2 | 1.6 | 46 | 2.6 | 68 | 48 | 4 | 350 |
| 42HS4804A6 | 1.8 | 0.4 | 30 | 38 | 34 | 2.6 | 68 | 48 | 6 | 350 |
| 42HS6315A4 | 1.8 | 1.5 | 3.8 | 8.5 | 75 | 3.5 | 72 | 63 | 4 | 470 |
Reducer type: planetary gear type
Ratio: 50:1
Max torque: 37Nm
Shaft:8mm keyway
Gearbox thickness:52mm
Motor Body:63mm
Wiring: black line=A , green line=A-, red=B , blue line=B-
Stepper motor driver adapted: M420B
Dear costomers:
Thank you for choose our store!
1. Please leave us your email in the message when you place an order, we\'ll send the manual , parameters,
or some emergency situations, we\'ll contact you at once.
2.If your shipping address is Brazil, please note your CPF or CNPJ when placing your order.
Thank you for your cooperation!
Working time: EST 9:00am ~ 6:00pm
Связанные категории
- Cnc Kit Laser Engraving Machine
- Current Shunt
- Rj11 Adaptor
- Cnc Servo
- Router Kit
- Kit For Cnc Router
- Pcb Potentiometer
- Stepper Motor Brake
- Nema42
- Motor Stepper
- Stepper Motor Nema 34
- Kit Cnc
- Gear Stepper
- Stepper Motor Kit
- Rgb Cct
- Cnc Kit Laser Engraving Machine
- Current Shunt
- Rj11 Adaptor
- 3 Axis Cnc Stepper Motor Controller Kit
- 50w Co2 Laser Engraving And Cutting Machine
- Cnc Router Kit
- 14 Teeth Gear
- Stepper Motor Nema 17
- 50 Battery
- Nema Kit
- Stepper Motor
- Cable Stepper
- Pcb Potentiometer
- Stepper Motor Brake
- Nema42
- Corner Connector
- Router Cnc Kit
- Gear Stepper
- Stepper Motor 4 Wire
- Nema17 34mm
- L297